Abedinejad, Mohammad Sadegh Analysis of Liquid Fuel Spray in an Evaporating Chamber [Volume 23, Issue 2, 2021, Pages 43-54]
Aghaei, Alireza Investigation of energy and exergy performance of parabolic trough solar collector with wind speed variations [Volume 23, Issue 1, 2021, Pages 109-124]
Azarafza, Reza Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
B
Babaei pouladi, Laya Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
Bohlouri, Vahid Satellite Attitude Control Using Modified PID Controller in the presence of Uncertainty [Volume 23, Issue 2, 2021, Pages 80-91]
D
Davar, Ali Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
Djavareshkian, Mohammad Hassan Effect of Optimized Roughness Distribution Elements on the Behavior of Phase portrait Circuits in Critical Reynolds [Volume 23, Issue 2, 2021, Pages 55-67]
E
Eslami Haghighat, Zahra Experimental Investigation of Suddenly Stop of Supercritical Airfoil SC-0410 between Pitching Motion [Volume 23, Issue 2, 2021, Pages 29-42]
Esmaeili, Ali Investigation of Thickness, Camber and Maximum Proximity Effect on Infinite Wavy Wing [Volume 23, Issue 1, 2021, Pages 73-85]
Esmaeili, Ali Effect of Optimized Roughness Distribution Elements on the Behavior of Phase portrait Circuits in Critical Reynolds [Volume 23, Issue 2, 2021, Pages 55-67]
F
Farmani, Mohammad Numerical study of the effect of rectangular finlets on the turbulent boundary layer trailing edge noise of a flat edge [Volume 23, Issue 2, 2021, Pages 136-153]
Farrokhabadi, Amin Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
Farsi, Mohammad Ali Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
Fartash, Amir hosein The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
Fazeli, Sadegh Numerical Simulation and Survey of Heat Transfer of Flow Mixing in a Lobed Mixer of a Turbofan Engine [Volume 23, Issue 1, 2021, Pages 160-174]
G
Ghadimi, Majid Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
Gholamnezhad, Pezhman UAV optimal routing based on reference vector guided evolutionary algorithm [Volume 23, Issue 1, 2021, Pages 44-55]
H
Hakimi, Meysam Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
Hojaji, Mohammad Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
Hoseinzadeh, Masoud Synthesis of epoxy substrate graphene oxide nanoparticles with the approach of reducing RCS and increasing the thermal resistance of UAVs [Volume 23, Issue 2, 2021, Pages 68-79]
Hossein Khani, Hasan Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
J
JABBARI, Hossein Effect of Optimized Roughness Distribution Elements on the Behavior of Phase portrait Circuits in Critical Reynolds [Volume 23, Issue 2, 2021, Pages 55-67]
Javadi Sigaroodi, MohammadRasoul The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
K
Karimi, Jalal Optimal Control of UAV Fuel Consumption during Circular Loitering Flight [Volume 23, Issue 2, 2021, Pages 1-12]
Karimi, Nima Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
KARIMI, JAVAD Requirements for equipping Tau anti-tank short-range missile with inertial guidance and navigation system [Volume 23, Issue 2, 2021, Pages 92-99]
Khanloh, Heshmatollah Identify Effective Factors in the Occurrence of Helicopters and
Provide Solutions to Reduce Disasters [Volume 23, Issue 1, 2021, Pages 1-17]
Khoshkhoo, Roohollah Numerical Simulation and Survey of Heat Transfer of Flow Mixing in a Lobed Mixer of a Turbofan Engine [Volume 23, Issue 1, 2021, Pages 160-174]
Kiani, Amir Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
M
Mahdian, Asghar Design, Analysis and Manufacturing of One-Manned Coaxial Electric Helicopter [Volume 23, Issue 2, 2021, Pages 13-28]
Mahmoodzadeh Entezari, Seyed Moein Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
Malekijavan, Alireza Synthesis of epoxy substrate graphene oxide nanoparticles with the approach of reducing RCS and increasing the thermal resistance of UAVs [Volume 23, Issue 2, 2021, Pages 68-79]
Malekzadeh Fard, Keramat Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
Mazloum, Jalil UAV optimal routing based on reference vector guided evolutionary algorithm [Volume 23, Issue 1, 2021, Pages 44-55]
Mohammadi-Amin, Meysam Mission Analysis of Launch Abort System of a Manned Spacecraft via Trajectory Simulation and Aerodynamic Numerical Modelling [Volume 23, Issue 1, 2021, Pages 145-159]
Morshedi, Hamid Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
Movahed Nejad, Hadi Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
N
Nikkhoo, Amirfarhang Investigation of Thickness, Camber and Maximum Proximity Effect on Infinite Wavy Wing [Volume 23, Issue 1, 2021, Pages 73-85]
O
Oloumi, Mohsen Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
P
Pazooki, Farshad Optimization and Design of General Aviation Aircrafts Wing Using Non-Dominated Sorting Genetic Algorithms II [Volume 23, Issue 2, 2021, Pages 100-115]
Pirali, Puya Three-Point Bending Test and Experimental and Numerical Modal Testing of Sandwich Plates with Grid Stiffened Core [Volume 23, Issue 1, 2021, Pages 125-144]
Pourmoayed, Alireza Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
Poursaeidi, Esmaeil The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
R
Rahimi, Javad The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
Rahmati lish, Mostafa Optimization and Design of General Aviation Aircrafts Wing Using Non-Dominated Sorting Genetic Algorithms II [Volume 23, Issue 2, 2021, Pages 100-115]
Ranjbar, Mohammad Ali Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
ROSTSAMIFARD, DARIUSH Semi-empirical electromechanical model for pulsed plasma thrusters using two different approaches and comparison with experimental results [Volume 23, Issue 2, 2021, Pages 116-123]
Roudbari, Alireza A framework for determining pilots’ priorities using antropomethric charactristics [Volume 23, Issue 1, 2021, Pages 18-32]
S
Sadati, Seyyed Hossein Optimal Control of UAV Fuel Consumption during Circular Loitering Flight [Volume 23, Issue 2, 2021, Pages 1-12]
Salarpour, Setayesh Experimental study of two-dimensional and axisymmetric pneumatic contact grippers for limp and porous materials [Volume 23, Issue 2, 2021, Pages 124-135]
Sarkhosh, Reza Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
Shahmirzalo, Ali Evaluation of plastic and elastic properties of magnesium plate in different rolling directions using correlation of digital images [Volume 23, Issue 1, 2021, Pages 56-72]
T
Taheri, Ehsan Designing the rapidly exploring random tree path planning algorithm for the vertical take-off and landing vehicle on the processor-in-the-loop test platform [Volume 23, Issue 1, 2021, Pages 86-96]
V
Vahidinia, Farhad Investigation of energy and exergy performance of parabolic trough solar collector with wind speed variations [Volume 23, Issue 1, 2021, Pages 109-124]
Y
Yousefi, Yousef The investigation of change in thermal conductivity of porous coatings during the aging process [Volume 23, Issue 1, 2021, Pages 97-108]
Z
Zadsirjan, Saeedreza Numerical Simulation and Survey of Heat Transfer of Flow Mixing in a Lobed Mixer of a Turbofan Engine [Volume 23, Issue 1, 2021, Pages 160-174]
Zarei, Hamidreza Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test [Volume 23, Issue 1, 2021, Pages 33-43]
Zarghami, Hamid Reza A framework for determining pilots’ priorities using antropomethric charactristics [Volume 23, Issue 1, 2021, Pages 18-32]
Zibafar, Amirreza Optimization and Design of General Aviation Aircrafts Wing Using Non-Dominated Sorting Genetic Algorithms II [Volume 23, Issue 2, 2021, Pages 100-115]
