Journal of Aeronautical Engineering

Journal of Aeronautical Engineering

Aerodynamic Investigation of Crow Flap Control System in a Flying Wing UAV Aircraft

Document Type : Original Article

Authors
Afshin Madani 1
Mohammad Hassan Djavareshkian 2
1 Mech. engg. Dep. Ferdowsi university of Mashhad
2 Mech. Engg. Dept. Ferdowsi university of mashhad
10.22034/joae.2024.352063.1109
Abstract
In this research, one of the widely used control systems of tailless aircraft, named Crow Flap, has been simulated by numerical method and the appropriate opening direction of this system has been investigated. By creating a differential drag on both sides of the aircraft, this system creates the necessary yawing moment and directional control. This system consists of two moving surfaces that are deflected against each other to neutralize each other's force and produce drag. One of the important issues in control systems is the reduction of disturbing moments. Determining the suitable opening direction with the least drag and disturbing moment and increasing the useful moments is the aim of this research. For this purpose, the measurement of these moments and forces are compared in two states of normal and reverse-opening. The UAV under investigation is a lambda-shaped UAV named Swing. Experiments have been carried out at AOAs of 0 to 12° for three opening angles. The created Mesh is unstructured. In this simulation, the continuity, momentum, and scalar equations have been solved by the Simple C algorithm after discretization with the finite volume method, and the turbulence model (K-ω-SST) has also been used. In this research, the opposite opening direction of the Crow Flap, unlike the usual opening direction mentioned in some articles, had a better result, so that at high AOAs, this opening direction has between 5 and 32% less drag and it has produced 10.5 to 35% more Yawing moment along with reducing disturbing moments.
Keywords
Crow Flap
Flying wing
UAV
Aerodynamic
Numerical solution
Subjects
[1]. Smith, H., "College of aeronautics blended wing body development programme", ICAS   Congress, pp. 1–10, 2000.
[2]. Dehpanah, P., and A Nejat., “The aerodynamic design evaluation of a blended-wing-body configuration”, Aerospace Science and Technology, Vol. 43, pp. 96–110, 2015.
[3]. M. Tomac and G. Stenfelt, Predictions of stability and control for a flying wing, Aerospace Science and Technology, Elsevier, 2014, pp. 179-186.
[4]. Gillard, W., Dorsett, K., Gillard, W., Dorsett, K., "Directional control for tailless aircraft using all moving wing tips", 22nd Atmospheric Flight Mechanics Conference, p. 3487, 2006.
[5]. Qin, N. et al. Qin, N., Vavalle, A., Le Moigne, A., Laban, M., Hackett, K., Weinerfelt, P., "Aerodynamic considerations of blended wing body aircraft", Progress in Aerospace Sciences, Vol. 40, No. 6, pp. 321–343, 2004.
[6]. Petterson, K., "Low-speed aerodynamic and flowfield characteristics of a UCAV", 24th AIAA Applied Aerodynamics Conference, p. 2986, 2006.
[7]. Shim, H., and Park, S. O., "Low-speed wind-tunnel test results of a BWB-UCAV model", Procedia Engineering, Vol. 67, pp. 50–58, 2013.
[8]. Ko, A., Chang, K., Sheen, D-J., Jo, Y-H., Shim, HJ., "CFD Analysis of the Sideslip Angle Effect around a BWB Type Configuration", International Journal of Aerospace Engineering, Vol. 2019, 2019.
[9]. Li, Z. J., and Ma, D. L., "Control characteristics analysis of split-drag-rudder", Applied Mechanics and Materials, Vol. 472, pp. 185-190, 2014.
[10]. Li, L-X., Xu, H-Y., Fu, Z-J., Huang, Z-C., "Numerical study of the yaw control of flapless aircraft", Aircraft Engineering and Aerospace Technology, 2022.
[11]. Zhu, J., Shi, Z., Sun, Q., Chen, J., Dong, Y., Fu, J., " Yaw control of a flying-wing unmanned aerial vehicle based on reverse jet control", Proceedings of the Institution of Mechanical Engineers", Vol. 234, No.6, pp. 1237–1255, 2020.
[15]. Bourdin, P., Gatto., A. Friswell, M., "Potential of articulated split wingtips for morphing-based control of a flying wing", 25th AIAA Applied Aerodynamics Conference, p. 4443, 2007.
[17]. Liu, Z., Zhang, B., "Investigation on a Flow Coupling Rudder for Directional Control of a Low-Aspect Tailless Configuration with Diamond-Shaped Wing", Aerospace, Vol. 9, No. 2, pp.79, 2022.
[18]. Rajput, J., Zhang, W. G., Qu, X. B., "A differential configuration of split drag-rudders with variable bias for directional control of flying-wing", Applied Mechanics and Materials, Vol. 643, pp. 54–59, 2014.
[19]. Huber, K. C., Vicroy, D. D., Schuette, A., Huebner, A., "UCAV model design and static experimental investigations to estimate control device effectiveness and S&C capabilities", 32nd AIAA Applied Aerodynamics Conference, p. 2002, 2014.
[20]. Stenfelt, G., and Ringertz, U., "Lateral stability and control of a tailless aircraft configuration", Journal of Aircraft, Vol. 46, No. 6, pp. 2161–2164, 2009.
[21]. Li, D., Liu, Q., Wu, Y., Xiang, J., "Design and analysis of a morphing drag rudder on the aerodynamics, structural deformation, and the required actuating moment", Journal of Intelligent Material Systems and Structures, Vol. 29, No. 6, pp. 1038–1049, 2018.
[22]. Colgren, R., and Loschke, R., "Effective design of highly maneuverable tailless aircraft", Journal of Aircraft, Vol. 45, No. 4, pp. 1441–1449, 2008.
[23]. Stenfelt, G., and Ringertz, U., "Yaw control of a tailless aircraft configuration", Journal of      Aircraft, Vol. 47, No. 5, pp. 1807–1811, 2010.
[24]. Shearwood, T. R., Nabawy, M. R. A., Crowther, W. J., Warsop, C., "A Novel Control Allocation Method for Yaw Control of Tailless Aircraft", Aerospace, Vol. 7, No. 10, pp. 150, 2020.
[25]. Tomac, M., and Stenfelt, G., "Predictions of stability and control for a flying wing", Aerospace Science and Technology", Vol. 39, pp. 179–186, 2014.
[26]. Kelayeh, R. K., and  Djavareshkian, M. H., "Aerodynamic investigation of twist angle variation based on wing smarting for a flying wing", Chinese Journal of Aeronautics, Vol. 34, pp. 201–216, 2021.
Journal of Aeronautical Engineering
Volume 26, Issue 1
August 2024
Pages 1-16

  • Receive Date 16 July 2022
  • Revise Date 17 August 2022
  • Accept Date 14 May 2024