Journal of Aeronautical Engineering

Journal of Aeronautical Engineering

The Technological Challenges in MAV Reconnaissance and the Method of Deal with Their Threats in the IRIAF

Document Type : Original Article

Authors
1 Shahid Sattari Aeronautical University of Science and Technology, Iran, Tehran
2 Aerospace Faculty- Shahid Sattari Aeronautical University of Science and Technology- Tehran-Iran
3 Theology faculty, Tehran University,Iran, Tehran
10.22034/joae.2024.312471.1064
Abstract
Due to its location in one of the most sensitive geographical areas of the world, Iran has always been threatened by enemies and therefore it is logical that proper planning should be done in order to strengthen the defense bases. One of these threats is the widespread use of MAV by the enemy for purposes such as reconnaissance and espionage, assassinations, etc., and the Airforce is always one of the targets of these threats. Therefore, it is essential that the necessary capacity to identify and deal with such threats be developed. This research is responsible for examining the technological challenges in identifying small birds and how to deal with their threats. In this research, the capacities, limitations and technological requirements for identifying and dealing with MAV threats have been investigated. Descriptive-survey method using data collection through library study, interview and questionnaire and its analysis using content analysis method and performing various statistical hypotheses (Kolmogorov-Smirnov, t-test and Friedman test using SPSS software) explains the strategies to deal with MAV threats in the Airforce and prioritizes these strategies. To achieve this goal, 12 existing solutions that have been used in different countries have been examined and it has been determined that the use of monitoring and disrupting systems for guidance and control of small birds, as well as the use of laser weapons to destroy small birds and Taking control of a small bird through a hack can be the first priority in countering this type of threat in the Airforce.
Keywords

Subjects


  • Ghasemabadi and H. Nemati," Introduction to of Micro Air Vehicles (MAVs) and presenting their detection and identification method," in 5th National Conference on Defense Science and Engineering, 2019(in Persian).
  • Birtwhistle, “An Investigation into Micro Air Vehicles.” The 2001 Science, Engineering & Technology Student of the Year Awards, Loughborough University, 2001.
  • J. McMichael and M.S. Francis," Micro Air Vehicles toward a New Dimension in Flight", Defense Advanced Research Projects Agency and formerly of Defense Airborne Reconnaissance Office, 1997.
  • Morris and M. Holden," Design of Micro Air Vehicles and Flight Test Validation", in Proceeding of the Fixed, Flapping and Rotary Wing Vehicles at Very Low Reynolds Numbers, 2000, pp. 153–176.
  • F. Huber, Death by a Thousands Cuts: Micro Air Vehicles in the Service of Airforce Missions, Air University Maxwell Airforce Base, Alabama, 2002.[E-book] Availabe: http://purl.access.gpo.gov/GPO/LPS44623
  • E. Green and P. Y. Oh ," An aerial robot prototype for situational awareness in closed quarters", Proceedings of 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003), Las Vegas, Nevada, 2003, pp. 61–66.
  • R. Mahmoudi, "Design and Construction of a Micro-UAV (SAR project)", B.Sc thesis, Dept. Aero, Shahid Sattari University of Aeronautical Sciences and Technology, Tehran, 2010(inPersian).
  • Torres and T. J. Mueller, "Micro Aerial Vehicle Development: Design, Components, Fabrication, and Flight-Testing", AUVSI Unmanned Systems 2000 Symposium and Exhibition, Orlando, FL, July 11-13, 2000.

[9]. D. Noetel, W. Johannes, M. Caris, A. Hommes and S. Stanko, "Detection of MAVs (Micro Aerial Vehicles) based on Millimeter Wave Radar", in Proc. of SPIE, 2016, Vol. 9993, pp. 999308-1- 999308-7.

[10]. J. Ratti and G. Vachtsevanos," A biologically-inspired micro aerial vehicle sensing, modeling and control strategies", Journal of Intelligent and Robotic Systems: Theory and Applications, vol.60, no.1, pp.153-178, Oct, 2010.

[11]. K. F. Jackson," Development and evaluation of a collision avoidance system for supervisory control of a micro aerial vehicle", M.Sc. Thesis, Dept. of Aeronautics and Astronautics, MIT Univ., Massachusetts, Cambridge, 2012.

[12]. L. Meier, P. Tanskanen, L. Heng, G. H. Lee, F. Fraundorfer and M. Pollefeys,"A micro aerial vehicle design for autonomous flight using onboard computer vision", Autonomous Robots, vol.33, no.1-2, pp.21–39, Aug, 2012.

[13]. P.  Abdorahim, M.  Ahmadiyan and Y. A. mazlaghani,"Futures studies of Anti- UAV Products using Robust Prioritization, Defensive Futures Studies, vol. 3, no. 11, pp. 143-164, Mar, 2019(in Persian).

[14]. A. Mohammadi, H. Navadehtoopchi, I. Forozan, H. Shokohi and E. Ejabi," Factors affecting drone detection and countermeasures in future battle scenes, Defensive Futures Studies, vol. 7, no. 25, pp. 137-166, Sep, 2022(in Persian).

[15]. Y. Moradi," 10 drone hunting methods; from deadly lasers to hacking in the sky," digiato.com, Aug. 29, 2018. [Online]. Available: https://digiato.com/article/2018/08/29/Anti-drone tools. [Accessed: Aug. 29, 2018].

[16]. Y. Moradi," Disruptive system to prevent the entry of MAV," farsnews.ir, Oct. 5, 2019. [Online]. Available:  https://www.farsnews.ir/news/13980711000828. [Accessed: Oct. 5, 2019].

 

[17]. A. Norouzi," Investigation of electronic attacks against drones", in 4th National Conference on Defense Science and Engineering in the IRGC, 2016 (in Persian).

[18]. Z. Sarmad, A. Bazargan and E. Hejazi, Research methods in behavioral sciences, Tehran, Iran, Agah Press, 2005(in Persian).

[19]. R. V. Krejcie & D. W. Morgan," Determining Sample Size for Research Activities", Educational and Psychological Measurement, vol.30, no.3, pp.607–610, 1970.

[20]. A. Azar, M. Momenei," Variance and standard deviation", in Statistics and Its Application in Management, 1Ed.Tehran, Iran, SAMT, 2005, ch.2, Sec.2-3-4, pp. 50-54(in Persian).

Volume 26, Issue 1
August 2024
Pages 42-55

  • Receive Date 28 October 2021
  • Revise Date 10 May 2023
  • Accept Date 14 May 2024