Journal of Aeronautical Engineering

Journal of Aeronautical Engineering

Analysis variations of volume fraction continuous functionally graded plates on the vibration of reinforced cylindrical shell under axial Loads with asymmetric boundary conditions

Document Type : Original Article

Authors
Mohammad Reza Isvandzibaei 1
Meysam Nouri Niyaraki 2
1 Department of Mechanical Engineering, Andimeshk Branch, Islamic Azad University, Andimeshk, Iran
2 Department of Mechanical Engineering, Semnan University
10.22034/joae.2023.380604.1154
Abstract
In this paper, Analysis variations of volume fraction continuous functionally graded materials on the vibration of reinforced cylindrical shell under axial loads with asymmetric boundary conditions are studied. The functionally graded plates shell is made in accordance to the volume fraction plates from two constituents namely stainless steel and nickel. These constituents are graded through the thickness direction, from one surface of the shell to the other and are controlled by volume fraction plates distribution. The reinforced functionally graded shell equations with axial loads are established based on first order shear deformation theory. The governing equations were employed with energy functional by applying Ritz method. The asymmetric boundary conditions represented by end conditions of the functionally graded shell are clamped-free, clamped-simply support and free-sliding. For validity and accuracy of the present methodology, the results obtained are compared with those available in the literature. Effects of volume fractional variations of functionally graded, axial loads, reinforced and asymmetric boundary condition on vibration of reinforced functionally graded cylindrical shell model are studied.
Keywords
Volume fraction
Functionally graded material
Vibration
Axial loads
asymmetric boundary conditions

Subjects

  • [1] M. S. Qatu, “Recent research advances in the dynamic behavior of shells”, Applied Mechanics Reviews, Vol. 55, No. 5, September 2002, pp. 415–434.
  •  
  • [2] E. E. Sechler, Thin-shell structures theory experiment and design, Englewood Cliffs, Prentice-Hall, California, 1974.
  •  
  • [3] A. H. Adawiya, An investigation of dynamic behavior of the cylindrical shells under thermal effect, Case Studies in Thermal Engineering, Vol. 12, No. 8, September 2018. pp. 537-545.
  •  
  • [4] R. D. Blevins, Formulas for natural frequency and mode shape, Van Nostrand Reinhold, New York, 1979.
  •  
  • [5] V. Johari, A. Hassani and M. Kazemian, Free vibration analysis of a circular cylindrical shell using a new four-variable refined shell theory, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 13, March 2022. pp. 7079-7094.
  •  
  •  [6] V. Birman, L. W. Byrd, “Modeling and analysis of functionally graded materials and structures”, Applied Mechanics Reviews, Vol. 60, No. 5, September 2007, pp. 195–216.
  •  
  • [7] M. Niino, T. Hirai, R. Watanabe, “The functionally gradient materials aimed at heat resisting materials for space plant”, Journal of the Japan Society for Composite Materials, Vol. 13, No. 4, February 1987, pp. 257–264.
  •  
  • [8] Y. Miyamoto, W. A. Kaysser, B. H. Rabin, A. Kawasaki, R. G. Ford, Functionally graded materials: design, processing and applications, Kluwer Academic Publishers, London, 1999.
  • [9] A. H. Sofiyev, “The stability of compositionally graded ceramic–metal cylindrical shells under a periodic axial impulsive loading”, Composite Structures, Vol. 69, No. 2, July 2005, pp. 57–247.
  •  
  • [10] H. Zafarmand and B. Hassani, “Analysis of two-dimensional functionally graded rotating thick disks with variable thickness”, Acta Mech Vol. 225, No. 13, 2014, 453–464
  •  
  • [11] Z. Iqbal, M. N. Naeem, N. Sultana, “Vibration characteristics of FGM circular cylindrical shells using wave propagation approach”, Acta Mechanica, Vol. 208, No. 5, December 2009, pp. 237–248.
  •  
  • [12] H. Shen, “Nonlinear vibration of shear deformable FGM cylindrical shells surrounded by an elastic medium”, Composite. Structures, Vol. 94, No. 3, February 2012 pp. 1144–1154.
  •  
  • [13] D. H. Bich, N. X. Nguyen, “Nonlinear vibration of functionally graded circular cylindrical shells based on improved Donnell equations”, Journal of Sound and Vibration, Vol. 331, No. 25, December 2012,  pp. 5488–5501.
  •  
  • [14] M. Strozzi, F. Pellicano, “Nonlinear vibrations of functionally graded cylindrical shells”, Thin-walled structures, Vol. 67, No. 1, June 2013, pp. 63–77.
  •  
  • [15] K. Foroutan, E. Carrera, H. Ahmadi “Nonlinear hygrothermal vibration and buckling analysis of imperfect FG-CNTRC cylindrical panels embedded in viscoelastic foundations”, European Journal of Mechanics - A/Solids, Volume 85, No.3,  2021, pp. 104-118.
  •  
  • [16] M. Song, Y. Gong, J. Yang and W. Zhu, “Nonlinear free vibration of cracked functionally graded graphene platelet-reinforced nanocomposite beams in thermal environments” Journal of Sound and Vibration, Volume 468, No. 3 2020, 656-670.
  • [17] X. Huang, K. Gao, J. Yang, “Fracture analysis of functionally graded multilayer graphene nanoplatelets-reinforced composite strips” European Journal of Mechanics - A/Solids Volume 83, No. 12, 2020, 432-446.
  •  
  • [18] M. Mirzaei, M. Jafari, “On the response of graphene platelet reinforced composite conical panels subjected to mechanical shock”, Materials Today Communications, Volume 34, No 2, 2023, 374-386.
  •  
  • [19] W. Soedel, Vibration of shells and plates, 3rd edn. Marcel Dekker Inc, New York, 2004.
  •  
  • [20] O. Ya. Grigorenko, M. Yu. Borisenko and O. V. Boichuk, Free Vibrations of a Corrugated Closed Cylindrical Shell, International Applied Mechanics, Vol. 58, No. 33, July 2022, pp. 43-52.
  •  
  •  [21] C. T. Loy, K. Y. Lam, J. N. Reddy, “Vibration of functionally graded cylindrical shells”, International Journal of Mechanical Sciences, Vol. 41, No. 3, March 1999, pp. 309–324.
Journal of Aeronautical Engineering
Volume 25, Issue 2
September 2023
Pages 129-141

  • Receive Date 09 January 2023
  • Revise Date 21 May 2023
  • Accept Date 30 September 2023