[1]. Ren Y., Xiang J., A comparative study of the crashworthiness of civil aircraft with different strut configurations, Int J Crashworthiness, Vol.15, pp 17-26, 2010.
[2]. Zou T., Mou H., Feng Z., Research on E_ects of Oblique Struts on Crashworthiness of Composite Fuselage Sections, Journal of Aircraft, Vol 49, pp 111-118, 2012.
[3]. Paz J., D´ıaz J., Romera L., Costas M., Size and shape optimization of aluminum tubes with GFRP honeycomb reinforcements for crashworthy aircraft structures, Composite Structures, Vol.15, pp 53-60, 2015.
[4].M. Chobini, Gh.H. Liaghat, Experimental and Numerical investigation of energy absorption and deformation of thin-walled tube with various geometry cross-section under lateral Impact loading, Tarbiat Modares University, 2013.
[5]. A. Meshkin zar, M. Darvizeh, A. Darvizeh, Analytical and experimental study of thin-walled sections for energy absorption under static and dynamic loading, Gilan University, 2012.
[6].Vahdat azad .N., Ebrahimi S, crashworthiness and energy absorption analysis on tapered tube filled by sandwich core, journal of aeronautical engineering, 2015.
[7]. Ahmad Z., Thambiratnam D.P., Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading, Computers & Structures , Vol.87 (3–
4) , pp.186–197, 2009.
[8].Reid S.R., Reddy T.Y., Axial crushing of foam-filled tapered sheet metal tubes, International Journal of Mechanical Sciences, Vol. 28 (10), pp.643–656, 1986.
[9]. Reid S.R., Reddy T.Y., Gray M.D., Static and dynamic axial crushing of foam-filled sheet metal tubes, International Journal of Mechanical Sciences , Vol.28 (5) , pp.295-322, 1986.
[10]. Santosa S., Wierzbicki T., Crash behavior of box columns filled with aluminum honeycomb or foam , Computers & Structures, Vol.68 (4), pp.343–367, 1998.
[11]. Seitzberger M., Rammerstorfer F.G., Degischer H.P., Gradinger R., Crushing of axially compressed steel tubes filled with aluminium foam, Acta Mechanica, Vol.125 (1–4) , pp.93–105, 1997.
[12]. Reyes A., Hopperstad O.S., Hanssen A.G., Langseth M., Modeling of material failure in foam-based components,International Journal of Impact Engineering ,Vol.30 (7) , pp.805–834, 2004.
[13]. Hou S.J., Li Q., Long S.Y., Yang X.J., Li W., Crashworthiness design for foam filled thin-wall structures, Materials & Design, Vol.30 (6), pp.2024–2032, 2009.
[14]. Zarei H.R., Kroger M., Optimization of the foam-filled aluminum tubes for crush box application, Thin-Walled Structures, Vol.46 (2), pp.214–221, 2008.
[15]. Zarei H.R., Kroger M., Crashworthiness optimization of empty and filled aluminum crash boxes, International Journal of Crashworthiness, Vol.12 (3), pp.255–264, 2007.
[16]. Narimanzadeh N., Darvizeh A., Jamali A., Pareto optimization of energy absorption of squae aluminium columns using multiobjective genetic algorithms, Journal of Engineering Manufacture, Vol.220 (2), pp.213–224, 2006.
[17]. Cui L., Kiernan S., Gilchrist M.D., Designing the energy absorption capacity of functionally graded foam materials, Materials Science and Engineering,Vol.507 (1–2), pp.215– 225, 2009.
[18]. Gupta N., A functionally graded syntactic foam material for high energy absorption under compression, Materials Letters, Vol.61, pp.979–982, 2007 .
[19]. Gupta N., Ricci W., Comparison of compressive properties of layered syntactic foams having gradient in microballoon volume fraction and wall thickness, Materials Science and Engineering A , Vol.427 , pp.331-342, 2006.
[20]. Kiernan S., Cui L., Gilchrist M.D., Propagation of a stress wave through a virtual functionally graded foam, International Journal of Non-Linear Mechanics, vol.44 (5), pp.456–468, 2009.
[21]. Brothers A.H., Dunand D.C., Mechanical properties of a density-graded replicated aluminum foam, Materials Science
and Engineering ,Vol.489 (1–2), pp.439-443,
2008.
[22]. Matsumoto Y., Brothers A.H., Stock S.R., Dunand D.C., Uniform and graded chemical milling of aluminum foams,
Materials Science and Engineering,
Vol.447(1–2), pp. 150-157, 2007.
[23]. Kieback B., Neubrand A., Riedel H., Processing techniques for functionally graded materials, Materials Science and Engineering, Vol.362 (1–2) ,pp.81-105, 2003 .
[24]. Guangyong S., Li G., Shujuan H., Shiwei Z., Wei L., Qing L., Crashworthiness design for functionally graded foam-filled thin-walled structures, Materials Science and Engineering A , Vol.527, pp1911–1919, 2010.
[25]. Hanfeng Y, Guilin W., Shujuan H., Qixiang Q., Multiobjective crashworthiness optimization of functionally lateral graded foam-filled tubes, Materials and Design, Vol.44 , pp.414–428, 2013.
[26]. Attia M.S., Meguid S.A., Nouraei H., Nonlinear finite element analysis of the crush behaviour of functionally graded foam-filled columns, Finite Elements in Analysis and Design, Vol. 61, pp.50–59, 2012.
[27]. Mohammadiha O. and Beheshti H., Optimization of functionally graded foam-filled conical tubes under axial impact loading, Journal of Mechanical Science and Technology, Vol. 67, pp.34–48, 2003.
[28]. [79] Hanfeng Y., Guilin W., Hongbing F., Qixiang Q., Xiangzheng K., Jiuru X., Zhibo L., Multiobjective crashworthiness optimization design of functionally graded foam-filled tapered tube based on dynamic ensemble metamodel, Materials and Design, Vol.55 , pp.747–757, 2014.
