@article { author = {Zarei, Hamidreza and Sarkhosh, Reza and Farrokhabadi, Amin and Morshedi, Hamid}, title = {Determination of static strength and fracture of aged aircraft structure using non-destructive quasi-static indentation test}, journal = {Journal of Aeronautical Engineering}, volume = {23}, number = {1}, pages = {33-43}, year = {2021}, publisher = {Shahid Sattari Aeronautical University of Science and Technology-Iranian Aerospace Society Director-in-Charge: Dr. Akbar Cheraqi Editor-in-Chief: Dr. Farhad Javidrad Associate Editor: Dr. Vahid Khalafi Website Manager: Amir Ehsan Zamanian Eng. Nima Mansour Lakouraj English Text Editor: Dr. Roohollah Maleki}, issn = {17359449}, eissn = {17359449}, doi = {10.22034/joae.2021.139469}, abstract = {Due to the impossibility of performing destructive tests, the need for new and Non-Destructive Tests (NDT) in this area is strongly felt. In the present study, using the non-destructive method of Automated Ball Indentation (ABI) test method, some mechanical properties of 4340 annealed steel and 7075 raw aluminum and prepared from aged aircraft are determined. To perform calculations related to ABI method, the explicit relations routine was coded in FORTRAN and verified. Then samples of uniaxial tensile test of 4340 annealed steel and 7075 raw aluminum and prepared from aged aircraft are prepared and their stress-strain curves are obtained. Also, ABI tests are performed on 4340 annealed steel samples and 7075 raw aluminum and prepared from aged aircraft and the results of the two methods were compared. The comparison of results showed that the calculated error of yield strength and ultimate strength was less than 9 and 14%, respectively. With increasing force, this value in some areas reached less than 0.7%.}, keywords = {Automated Ball Indentation,ABI,NDT,Stress- Strain}, title_fa = {تعیین استحکام استاتیکی و شکست سازه هواپیماهای فرسوده با استفاده از آزمایش غیرمخرب نفوذ شبه استاتیکی}, abstract_fa = {با توجه به غیرممکن بودن انجام آزمایش‌های مخرب، بر روی ناوگان هواپیمایی نیاز به روش‌های جدید و غیرمخرب به‌شدت احساس می‌شود. در پژوهش حاضر با استفاده از روش غیرمخرب نفوذ اتوماتیک گوی (ناگ) برخی از خواص مکانیکی فولاد 4340 آنیل شده و آلومینیوم 7075 خام و تهیه شده از هواپیمای فرسوده تعیین شده است. به منظور انجام محاسبات مربوط به روش ناگ کدنویسی روابط صریح در نرم افزار فرترن انجام و اعتبار سنجی شده است. در ادامه نمونه‌های آزمون کشش تک محوری از فولاد 4340 آنیل شده و آلومینیوم 7075 خام و تهیه شده از هواپیمای فرسوده آماده شده و منحنی تنش کرنش آن استخراج شده است. همچنین آزمون نفوذ اتوماتیگ گوی بر روی نمونه‌های فولادی 4340 آنیل‌شده و آلومینیوم 7075 خام و تهیه شده از هواپیمای فرسوده انجام گردید و نتایج حاصل از دو روش با هم مقایسه شد. نتایج مقایسه بین آزمایش کشش و ناگ نشان داد که خطای محاسبه تنش تسلیم و استحکام نهایی، به ترتیب کم‌تر از 9 و 14٪ بود. با افزایش نیرو، این مقدار در برخی نقاط به کم‌تر از 0/7 ٪ رسید.}, keywords_fa = {نفوذ اتوماتیک گوی,ناگ,غیر مخرب,تنش-کرنش}, url = {https://www.joae.ir/article_139469.html}, eprint = {https://www.joae.ir/article_139469_da873a64de689bd9a8f156c7d15161e8.pdf} }